• 关于我们banner_proc

Lowest Price for Stitching wire - 17Ga Galvanized Steel Wire For Corner Aid – TIANJIN MEIJIAHUA

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To be a result of ours specialty and service consciousness, our enterprise has won an excellent status between buyers all around the globe for Gypsum Screw For Metal , Gl Steel Coil , Erw Pipe, We are devoted to provide professional purification technology and solutions for you!
Lowest Price for Stitching wire - 17Ga Galvanized Steel Wire For Corner Aid – TIANJIN MEIJIAHUA Detail:

Galvanized steel wire for Corner Aid is a soft,High-quality 17-gauge galvanized metal wire build for longevity.

Low carbon galvanized wire for Corner Aid & Bullnose are produced to meet the requirements of BS EN 10244; ASTM_A_641(zinc-coated) etc. The specification can be made by customer’s requirement.

The diameter of the wire is available from 0.7874mm to 8.0mm and is available in either coils or stems.

High Tensile Strength Wire

Drawing process:

Plating before drawing process: In order to improve the performance of galvanized steel wire, the process in which the steel wire is scorched by lead, galvanized and then drawn to the finished product is called the first plating and then drawing process. The typical process flow is: steel wire – lead quenching – galvanizing – drawing – finished steel wire.
The process of drawing after middle plating: the process of drawing after middle plating is: steel wire – lead quenching – primary drawing – galvanizing – secondary drawing – finished steel wire. The characteristics of middle-plating and post-drawing are that the lead-quenched steel wire is drawn once, then galvanized, and then drawn twice to the finished product.
Mixed plating and drawing process: To produce ultra-high strength (3000 N/mm2) galvanized steel wire, a “mixed plating and drawing” process is used. The typical process flow is as follows: lead quenching—one drawing—pre-galvanizing—second drawing—final galvanizing—three drawing (dry drawing)—water tank drawing a finished steel wire. The above process can produce ultra-high-strength galvanized steel wire with a carbon content of 0.93-0.97%, a diameter of 0.26 mm, and a strength of 3921 N/mm2.

 

Diameter Tolerances

Nominal Wire Diameter Tolerance (mm)
over 0.80mm up to and incl. 1.60mm +/-0.03
over 1.60mm up to and incl. 2.50mm +/-0.03
over 2.50mm up to and incl. 4.00mm +/-0.03
over 4.00mm up to and incl. 5.00mm +/-0.04
over 5.00mm up to and incl. 8.00mm +/-0.04

 

Galvanised Coating Weight – AS3863; EN 10244; ASTM A 641

Wire Diameter(mm) Wire Diameter (inch) Minimum Ctg Mass Class 1 (g/m2) Minimum Ctg Mass Class 2 (g/m2) Minimum Ctg Mass Class 3 (g/m2)
0.7874 0.031 30 25 135
0.813 0.032 30 45 165
1.24 0.049 30 45 200
2.41 0.095 90 245 365
2.68 0.106 90 245 365
2.79 0.11 90 245 365
3.68 0.145 90 245 365

Tensile Strength (MPa):

The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range is 448-517 MPa; 551-620 MPa; 65000psi~75000psi; 80000psi~90000psi

Steel Chemistry:

A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.

Tensile Grade % Carbon % Phosphorus % Manganese % Silicon % Sulphur
Standard 0.04~0.07 0.032 0.5 ~1.00 0.10~0.34 0.041
High 0.1~0.18 0.035 0.5 ~1.10 0.10~0.35 0.045

Quality Control:

We use total quality control system. Every pieces of the raw material; semi-finished products and finished products are tested and recorded in file. The tracking record is used from final products to the very first beginning raw material steel factories.

Third Part like SGS is available for test control before shipment

Packing:

1) All the products are packed with seaworthy packing.
2) Customer’s special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.

Application:

High Tensile Strength Wire
Galvanized Steel Wire For Construction

Our Company mainly specializes in importing and exporting metal material and metal products, and we also do transit trade, domestic trade and agent operation. Our products have been sold to Europe, America, New Zealand, Japan, South Korea, Southeast Asia, the Middle East, Africa and Hong Kong. We have distributors at home and abroad. “High quality, reputation and good service” is our management concept. Sincerely cooperate with friends all over the world for the mutual development.


Product detail pictures:

Lowest Price for Stitching wire - 17Ga Galvanized Steel Wire For Corner Aid – TIANJIN MEIJIAHUA detail pictures

Lowest Price for Stitching wire - 17Ga Galvanized Steel Wire For Corner Aid – TIANJIN MEIJIAHUA detail pictures

Lowest Price for Stitching wire - 17Ga Galvanized Steel Wire For Corner Aid – TIANJIN MEIJIAHUA detail pictures

Lowest Price for Stitching wire - 17Ga Galvanized Steel Wire For Corner Aid – TIANJIN MEIJIAHUA detail pictures


Related Product Guide:

The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Lowest Price for Stitching wire - 17Ga Galvanized Steel Wire For Corner Aid – TIANJIN MEIJIAHUA , The product will supply to all over the world, such as: Estonia, Turin, Hungary, We are sticking to excellent quality, competitive price and punctual delivery and better service, and sincerely hope to establish long-term good relationships and cooperation with our new and old business partners from all over the world. Sincerely welcome you to join us.
  • It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Roland Jacka from Sacramento - 2018.06.09 12:42
    We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
    5 Stars By Dolores from Luxemburg - 2018.07.12 12:19
    Write your message here and send it to us